How do I rebuild a RAID 1 array on a Western Digital Serial ATA RAID card?

Question

How do I rebuild a RAID 1 array on a Western Digital Serial ATA RAID card?


Answer

To rebuild a RAID 1 array on a Western Digital Serial ATA RAID card please follow the steps below:
1. Press the Control and F keys at the same time to enter the card's BIOS.
2. Select the Define Array option and press the 3 key.
3. Select the failed array and identify the channel and ID of the failed drive.
4. Shut down your computer and remove the failed drive.
5. Replace the failed drive with another identical drive.
6. Reboot the computer and press Control and F again to enter the BIOS of the card.
7. Press the 5 key to select the Rebuild Array option.
8. Highlight the critical array and press Enter.
9. Select the replacement drive to rebuild and press Enter to copy the data onto the replacement drive.
10. Once the data copy is complete, reboot the computer after you exit from the card's BIOS